Integrity Testing

---

Integrity testing is one of the most important components of any fire suppression system.

Imagine having installed a fire suppression system and it does not function correctly because the room was not adequately sealed and the suppression agent leaked out before a fire could be extinguished. Or the room was sealed too tightly and the suppression release damaged the structure of the room!

At Aspect Fire Solutions we include integrity testing with
all the systems we Design and install.

We can carry out Integrity testing on a wide range of
suppression systems and can carry out annual integrity
testing of a wide range of manufacturers systems.
We can provide pressure relief dampers if required and
can offer an installation service.

We offer a full room sealing service to a guarenteed pass!!

The effectiveness of a gaseous fire suppression system
can only by guaranteed by regular ongoing maintenance
of that facility.

As part of an annual program of system maintenance, integrity testing of the protected enclosure must be undertaken to ensure that, on discharge, the extinguishing agent achieves the correct concentration at the necessary height for the minimum required retention time.

ISO 15004 states that an enclosure protected by a gaseous extinguishing system must be integrity tested on an annual basis or when changes are made to the enclosure boundary such as new cable penetrations.

Remember before you consider installing any fire suppression system contact Aspect Fire Solutions. We would be pleased to discuss and give any advice you may require.

For further information on our integrity testing services please contact your local office.
Northern Office: 0845 0540 516 / Southern Office: 0845 0540 518